Pentair Pool heater MasterTemp ERR AFS Error Code
What the ERR AFS code means
On Pentair MasterTemp gas pool heaters, ERR AFS means the air flow switch is open - the blower is not on or air through it is being restricted. If adequate airflow is established within 60 seconds the heater resumes; otherwise press HEATER OFF.
Likely causes
- blower not running
- restricted air intake or exhaust
- blocked venting
- failed air flow switch
How to fix it — step by step
- Turn the heater off with HEATER OFF
- Check outside the cabinet that air intake and exhaust are not visibly blocked
- Restart once and listen for the blower → Shop the blower at RepairClinic
- Do not open the cabinet or bypass the air flow switch → Shop the air flow switch at RepairClinic
- If ERR AFS returns, call a pool/spa technician
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the air flow switch.
Shop the air flow switch at RepairClinic or Amazon
Also tied to this fault: blower - Shop at RepairClinic or Amazon
Parts that commonly fix the ERR AFS code
- air flow switch - Shop at RepairClinic or Amazon
- blower - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.