Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) EH0b Error Code

What the EH0b code means

Communication malfunction between the main control board and the display board on Midea QB inverter window air conditioners (MWAUQB CRFN8 service manual; same inverter window platform as the Midea U MAW V1QWT series). Per the service manual, the display board does not receive feedback from the driver board for 120 seconds.

Likely causes

  1. Loose wire port between the display panel and the PCB
  2. Display panel circuit component failure
  3. Main PCB circuit component failure

How to fix it — step by step

  1. Power the unit off, then restart it
  2. If the code does not clear after 2 minutes, call a technician - the service manual's diagnosis is to check the wire between the display panel and PCB, then replace the display panel or the PCB as indicated → Shop the main control board (pcb) at RepairClinic

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the EH0b code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) error codes

See all Midea QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) codes & guides →