Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) EC51 Error Code
What the EC51 code means
Main control board EEPROM parameter error on Midea QB inverter window air conditioners (MWAUQB CRFN8 service manual; same inverter window platform as the Midea U MAW V1QWT series). Per the service manual, the main chip does not receive feedback from the EEPROM chip.
Likely causes
- Main control board EEPROM chip failure
- Main PCB circuit component failure
How to fix it — step by step
- Power the unit off, then restart it
- If the code does not clear after 2 minutes, the PCB must be replaced - call a technician → Shop the main control board (pcb) at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the main control board (PCB).
Parts that commonly fix the EC51 code
- main control board (PCB) - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) error codes
See all Midea QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) codes & guides →