Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) EC07 Error Code

What the EC07 code means

The outdoor fan speed is operating outside of the normal range on Midea QB inverter window air conditioners (MWAUQB CRFN8 service manual; same inverter window platform as the Midea U MAW V1QWT series). When fan speed stays too low or too high for a set time, the LED displays the failure code and the air conditioner turns off.

Likely causes

  1. Fan feedback line not plugged in on the power board → Shop the main control board (power board) at RepairClinic
  2. Faulty power board / main PCB
  3. Faulty outdoor fan motor → Shop the outdoor fan motor at RepairClinic
  4. Obstructed or seized fan

How to fix it — step by step

  1. Power the unit off, then restart it
  2. If the code does not clear after 2 minutes, stop and call a technician - the service manual's diagnosis requires opening the unit to check the fan feedback line, then replacing the PCB or fan motor as indicated

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the EC07 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) error codes

See all Midea QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) codes & guides →