Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) PC01 Error Code
What the PC01 code means
Over voltage or over low voltage protection on Midea QB inverter window air conditioners (MWAUQB CRFN8 service manual; same inverter window platform as the Midea U MAW V1QWT series). Per the service manual, abnormal increases or decreases in supply voltage are detected by the voltage detection circuit (protection range 95V-304V).
Likely causes
- Abnormal supply voltage (too high or too low)
- Faulty voltage detection circuit on the PCB
How to fix it — step by step
- Turn the unit off and check whether the power supply is normal; do not run the unit on an abnormal supply
- Restart the unit once supply voltage is normal
- If the code returns on a normal supply, call a technician - the service manual directs replacing the PCB → Shop the main control board (pcb) at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the main control board (PCB).
Parts that commonly fix the PC01 code
- main control board (PCB) - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) error codes
See all Midea QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) codes & guides →