Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) PC06 Error Code
What the PC06 code means
Temperature protection of compressor discharge on Midea QB inverter window air conditioners (MWAUQB CRFN8 service manual; same inverter window platform as the Midea U MAW V1QWT series). The service manual notes this code is only displayed in engineer mode.
Likely causes
- Compressor discharge temperature too high, e.g. from low refrigerant charge or restricted airflow over the condenser
- Dirty condenser coil or blocked outdoor side of the unit
How to fix it — step by step
- Turn the unit off and let it cool; make sure the outdoor side of the unit is not blocked
- Call a technician for diagnosis - discharge-temperature protection involves the sealed refrigerant system and compressor → Shop the compressor at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the compressor.
Shop the compressor at RepairClinic or Amazon
Also tied to this fault: compressor discharge temperature sensor (T5) - Shop at RepairClinic or Amazon
Parts that commonly fix the PC06 code
- compressor - Shop at RepairClinic or Amazon
- compressor discharge temperature sensor (T5) - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) error codes
See all Midea QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) codes & guides →