Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) PC00 Error Code

What the PC00 code means

IPM malfunction or IGBT over-strong current protection on Midea QB inverter window air conditioners (MWAUQB CRFN8 service manual; same inverter window platform as the Midea U MAW V1QWT series). Per the service manual, when the chip detects IPM or IGBT overcurrent (trigger value around 25A), the LED displays the failure code and the air conditioner turns off.

Likely causes

  1. IPM module / inverter drive fault on the PCB
  2. Compressor overcurrent or failing compressor

How to fix it — step by step

  1. Power the unit off, then restart it once
  2. If the code returns, stop using the unit and call a technician - the service manual's diagnosis is to replace the PCB, and if the code still does not clear, replace the compressor → Shop the compressor at RepairClinic

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the PC00 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) error codes

See all Midea QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) codes & guides →