Kenmore Dryer 110 Series (Whirlpool-Built) F:02 Error Code
What the F:02 code means
Keypad or user interface failure on Kenmore Elite dryers (110-series Whirlpool-built platform): a key is stuck or the interface is not responding correctly.
Likely causes
- Stuck or damaged keypad key
- Loose user interface wiring
- Failed user interface control → Shop the user interface control at RepairClinic
How to fix it — step by step
- Press each key to check none is stuck, then unplug for a minute and retry
- Stop if F:02 returns or keys do not respond
- Call a technician to check the interface wiring and replace the keypad or interface if faulty → Shop the keypad at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the user interface control.
Shop the user interface control at RepairClinic or Amazon
Also tied to this fault: keypad - Shop at RepairClinic or Amazon
Parts that commonly fix the F:02 code
- user interface control - Shop at RepairClinic or Amazon
- keypad - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Kenmore manual is on Kenmore's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.
Related Kenmore Dryer 110 Series (Whirlpool-Built) error codes
See all Kenmore 110 Series (Whirlpool-Built) codes & guides →