Kenmore Dryer 110 Series (Whirlpool-Built) F:01 Error Code
What the F:01 code means
Main electronic control board failure on Kenmore Elite dryers (110-series Whirlpool-built platform). The control is not processing correctly and the dryer will not run normally.
Likely causes
- Failed main electronic control board → Shop the main control board at RepairClinic
- Loose control board wiring connection
- Power surge damaging the control
How to fix it — step by step
- Unplug the dryer for about a minute, restore power and try a cycle
- Stop using the dryer if F:01 returns immediately
- Call a technician to test the control board connections and replace the board if faulty
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the main control board.
Parts that commonly fix the F:01 code
- main control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Kenmore manual is on Kenmore's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.
Related Kenmore Dryer 110 Series (Whirlpool-Built) error codes
See all Kenmore 110 Series (Whirlpool-Built) codes & guides →