Hayward Pool heater Universal H-Series Sb Error Code
What the Sb code means
On Hayward Universal H-Series gas pool heaters, Sb means a keypad failure from a stuck button - a button held closed for an extended period.
Likely causes
- keypad button stuck closed
- debris or moisture on the keypad
- failed keypad/display assembly
How to fix it — step by step
- Gently press and release each keypad button to free a stuck key → Shop the keypad at RepairClinic
- Wipe the keypad clean and dry with power off
- Cycle power at the breaker and check if Sb clears
- If Sb returns with no button pressed, call a pool/spa technician about the keypad assembly
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the keypad.
Shop the keypad at RepairClinic or Amazon
Also tied to this fault: display board - Shop at RepairClinic or Amazon
Parts that commonly fix the Sb code
- keypad - Shop at RepairClinic or Amazon
- display board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Hayward manual is on Hayward's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.