Hayward Pool heater Universal H-Series PF Error Code
What the PF code means
On Hayward Universal H-Series gas pool heaters, PF means voltage polarity is reversed or low voltage was detected at the heater.
Likely causes
- reversed line/neutral polarity
- low supply voltage
- loose electrical connection
- wrong voltage selector on install
How to fix it — step by step
- Turn the heater off at the breaker
- Do not swap wires yourself - polarity work is inside the electrical junction
- Note whether other equipment on the circuit is also misbehaving
- Call a licensed electrician or pool/spa technician to verify polarity and voltage
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the control board.
Parts that commonly fix the PF code
- control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Hayward manual is on Hayward's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.