Hayward Pool heater Universal H-Series HF Error Code
What the HF code means
On Hayward Universal H-Series gas pool heaters, HF means flame is present with the gas valve not energized - a serious flame-sensing/gas valve safety fault.
Likely causes
- gas valve fault → Shop the gas valve at RepairClinic
- flame sensor fault → Shop the flame sensor at RepairClinic
- control board fault → Shop the control board at RepairClinic
How to fix it — step by step
- Turn the heater off immediately and close its gas shutoff if you can do so safely outside the cabinet
- Do not attempt to relight or reset repeatedly
- Leave the area if you smell gas and call your gas utility from outside
- Call a licensed pool/spa or gas technician before using the heater again
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the gas valve.
Shop the gas valve at RepairClinic or Amazon
Also tied to this fault: flame sensor - Shop at RepairClinic or Amazon; control board - Shop at RepairClinic or Amazon
Parts that commonly fix the HF code
- gas valve - Shop at RepairClinic or Amazon
- flame sensor - Shop at RepairClinic or Amazon
- control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Hayward manual is on Hayward's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.