Hayward Pool heater Universal H-Series AO Error Code
What the AO code means
On Hayward Universal H-Series gas pool heaters, AO means the blower vacuum switch is open; the Quick Reference Guide notes to check the voltage selector plug on a new install.
Likely causes
- blower not proving vacuum → Shop the blower at RepairClinic
- incorrect voltage selector plug on new install
- blocked venting or blower fault
- failed blower vacuum switch → Shop the blower vacuum switch at RepairClinic
How to fix it — step by step
- Turn the heater off and note the code
- Check that venting is clear of visible obstructions outside the cabinet
- On a new install, stop and have the installer verify the voltage selector plug
- Cycle power once and retry a call for heat
- If AO returns, call a pool/spa technician - do not bypass the switch
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the blower vacuum switch.
Shop the blower vacuum switch at RepairClinic or Amazon
Also tied to this fault: blower - Shop at RepairClinic or Amazon
Parts that commonly fix the AO code
- blower vacuum switch - Shop at RepairClinic or Amazon
- blower - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Hayward manual is on Hayward's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.