Dreame Robot vacuum Dreame W10 The robot will not turn on
What this problem usually means
The robot does not power on.
Likely causes
- Battery is low
- Battery temperature is too low or too high (operating temperature 32°F/0°C to 104°F/40°C)
How to fix it — step by step
- Recharge the robot on the base and try again
- Operate the appliance at a temperature between 32°F (0°C) and 104°F (40°C)
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame W10 problems
- The side brush falls off
- The washboard is not installed (base display error: "Washboard Not Installed")
- The water level in the washboard is abnormal
- A room-based map cannot be created in the app
- Base display error: "Fresh Tank Not Installed"
- Base display error: "Insufficient Water in Fresh Tank" / Water in the fresh tank is insufficient
- Base display error: "Waste Tank Malfunction"
- The charging speed is slow
- The cleaning performance is poor
- The mop pad falls off
- The noise increases while the robot is operating
- The robot cannot find the base or will not return to the base