Dreame Robot vacuum Dreame W10 The noise increases while the robot is operating
What this problem usually means
The robot becomes noticeably louder during cleaning.
Likely causes
- The dust bin is full
- Hard objects are trapped around the main brush and the dust bin
- The main brush and side brush are entangled with hair or debris
How to fix it — step by step
- Empty the dust bin
- Check for and clean up hard objects trapped around the main brush and dust bin
- Check and clean hair or debris tangled on the main brush and side brush
- Switch the suction mode to Standard or Quiet
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame W10 problems
- The robot cannot find the base or will not return to the base
- The robot does not respond to the base
- The robot fails to connect to Wi-Fi
- The robot gets into trouble while working and stops
- The robot is malfunctioning
- The robot is stuck and stops operating
- The robot is stuck in front of the base and cannot return to the base
- The robot leaks dust while cleaning
- The robot makes a strange noise while operating
- The robot misses the rooms to be cleaned
- The robot moves without following the set route
- The robot often strays into no-go zones or areas with virtual walls