Dreame Robot vacuum Dreame W10 The side brush falls off
What this problem usually means
The side brush detaches during cleaning.
Likely causes
- The side brush is not installed until it clicks into place
- The side brush is entangled by power cords
How to fix it — step by step
- Re-install the side brush until it clicks into place → Shop the side brush at Amazon
- Remove power cords from the floor before cleaning
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Side brush.
Parts that commonly fix it
- Side brush - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame W10 problems
- The washboard is not installed (base display error: "Washboard Not Installed")
- The water level in the washboard is abnormal
- A room-based map cannot be created in the app
- Base display error: "Fresh Tank Not Installed"
- Base display error: "Insufficient Water in Fresh Tank" / Water in the fresh tank is insufficient
- Base display error: "Waste Tank Malfunction"
- The charging speed is slow
- The cleaning performance is poor
- The mop pad falls off
- The noise increases while the robot is operating
- The robot cannot find the base or will not return to the base
- The robot does not respond to the base