Dreame Robot vacuum Dreame W10 A room-based map cannot be created in the app
What this problem usually means
The robot fails to build its first room-based map.
Likely causes
- The robot did not start from the base
- The robot was moved while creating its first map
- The robot failed to return to the base after mapping because of obstacles
How to fix it — step by step
- Start the robot from the base to create a map; using the fast mapping function is recommended
- Do not move the robot when it creates a map for the first time, otherwise positioning failure may occur
- After the first map is created, check whether the robot fails to return to the base and remove any obstacles around it
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame W10 problems
- Base display error: "Fresh Tank Not Installed"
- Base display error: "Insufficient Water in Fresh Tank" / Water in the fresh tank is insufficient
- Base display error: "Waste Tank Malfunction"
- The charging speed is slow
- The cleaning performance is poor
- The mop pad falls off
- The noise increases while the robot is operating
- The robot cannot find the base or will not return to the base
- The robot does not respond to the base
- The robot fails to connect to Wi-Fi
- The robot gets into trouble while working and stops
- The robot is malfunctioning