Dreame Robot vacuum Dreame W10 The robot cannot find the base or will not return to the base

What this problem usually means

The robot cannot locate or return to its base on its own.

Likely causes

  1. The base is unplugged or was moved when the robot was not placed onto it
  2. The robot's path back is blocked, e.g. a closed door
  3. Too many obstacles around the base
  4. The robot was moved and is too far from the base to return automatically
  5. Dust or dirt on the signaling area of the base

How to fix it — step by step

  1. Reconnect the base and do not move it while the robot is away
  2. Open the robot's path back to the base
  3. Place the base in an area without obstacles around it
  4. If the robot is too far away, manually place the robot onto the base
  5. Wipe the signaling area on the base to remove dust or dirt

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Dreame Robot vacuum Dreame W10 problems

See all Dreame Dreame W10 codes & guides →