Dreame Robot vacuum Dreame W10 The cleaning performance is poor
What this problem usually means
The robot leaves dirt behind or cleans weakly.
Likely causes
- The dust bin is full
- The filter needs cleaning
- The filter is not fully dried after being washed
How to fix it — step by step
- Empty the dust bin
- Check and clean the filter → Shop the filter at Amazon
- Dry the filter fully before use after washing it
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Filter.
Parts that commonly fix it
- Filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Dreame Robot vacuum Dreame W10 problems
- The mop pad falls off
- The noise increases while the robot is operating
- The robot cannot find the base or will not return to the base
- The robot does not respond to the base
- The robot fails to connect to Wi-Fi
- The robot gets into trouble while working and stops
- The robot is malfunctioning
- The robot is stuck and stops operating
- The robot is stuck in front of the base and cannot return to the base
- The robot leaks dust while cleaning
- The robot makes a strange noise while operating
- The robot misses the rooms to be cleaned