Trane Furnace Two-stage IFC — XV80/XV90/XV95/XL80/XL90 (*UD2/*DD2) 3 flashes

What it should look like on your machine

then it repeats

3 flashes - then the pattern repeats. Count along with your machine and compare.

What this problem usually means

On Trane two-stage furnaces (XV80, XV90, XV95, XL80, XL90 families, *UD2/*DD2), the green LED flashes 3 times: the first-stage pressure switch is stuck open or there is an inducer error — draft was not proved for first-stage heat.

Likely causes

  1. Blocked or frozen vent or intake termination
  2. Clogged or frozen condensate drain or trap
  3. Weak or failed inducer motor → Shop the inducer motor at RepairClinic
  4. Failed pressure switch (the first-stage switch on two-stage models) or cracked pressure hose

How to fix it — step by step

  1. Check the outdoor PVC intake and exhaust terminations and clear snow, ice, leaves or debris you can safely reach
  2. Check the condensate drain hose and trap for kinks, clogs or freezing
  3. Confirm the thermostat is calling for heat and the furnace switch is on
  4. Reset power once (off 30 seconds, then on) and watch whether the code returns
  5. If it returns, call a technician to test the inducer, pressure switch and venting — do not bypass the switch → Shop the pressure switch at RepairClinic

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Trane manual is on Trane's support site — you'll need your model number.

Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.

Related Trane Furnace Two-stage IFC — XV80/XV90/XV95/XL80/XL90 (*UD2/*DD2) problems

See all Trane Two-stage IFC — XV80/XV90/XV95/XL80/XL90 (*UD2/*DD2) codes & guides →