Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) EC53 Error Code

What the EC53 code means

Outdoor room temperature sensor T4 is in open circuit or has short circuited, on Midea QB inverter window air conditioners (MWAUQB CRFN8 service manual; same inverter window platform as the Midea U MAW V1QWT series).

Likely causes

  1. Loose temperature sensor port/connector
  2. Failed T4 outdoor temperature sensor → Shop the outdoor temperature sensor (t4) at RepairClinic
  3. PCB circuit component failure

How to fix it — step by step

  1. Power the unit off and stop using it
  2. Call a technician - the service manual's diagnosis is to check the sensor connection, substitute a known-good temperature sensor, and replace the PCB if the code still does not clear → Shop the main control board (pcb) at RepairClinic

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the EC53 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Midea Window Air Conditioner QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) error codes

See all Midea QB inverter / Midea U (MWAUQB CRFN8; MAW V1QWT series) codes & guides →