Maytronics Dolphin Pool cleaner Steady red light on power supply
What this problem usually means
On IoT power supplies, a steady red On/Off LED means a fault. (Flashing green on the On/Off LED is only the weekly-timer/delay wait state, and alternating blue/green/red means a remote program update is running.)
Likely causes
- A robot fault — most commonly a clogged filter basket, debris in the impeller, or a cable/connection problem (see the troubleshooting table)
How to fix it — step by step
- Turn the power supply OFF
- Clean the filter basket and check the impeller housing for stuck debris
- Check the blue cable is securely connected at both the power supply and check the power cord connection
- Turn the power supply back ON and restart; if the steady red light returns, contact your dealer or Maytronics support
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.