Maytronics Dolphin Pool cleaner Robot does not move
What this problem usually means
The robot sits still in the pool and does not drive, even though the power supply is on.
Likely causes
- The blue cable is not properly connected to the power supply outlet
- An obstacle is blocking the impeller, tracks, or wheels
How to fix it — step by step
- Check that the blue cable is securely connected to the power supply
- Unplug the power supply, open the impeller cover, and check that nothing is trapped in the impeller
- Verify that nothing blocks the tracks or wheels
- Reconnect and restart the cycle
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.