Maytronics Dolphin Pool cleaner Red blinking light
What this problem usually means
The indicator light on the robot is blinking red: the cleaner has detected an error. (Blue blinking is normal operation.) Maytronics does not publish a blink-count chart for Dolphin models — one red blink pattern covers all robot errors, so work through the standard checks.
Likely causes
- Clogged filter basket
- Debris stuck in the impeller housing or impeller cover
- Floating (blue) cable not properly connected to the power supply
How to fix it — step by step
- Turn the power supply OFF and unplug it before inspecting the robot
- Clean the filter basket
- Open the impeller cover and remove any debris stuck in the impeller housing
- Check that the blue cable is securely connected to the power supply
- Turn the power supply back ON and restart the cycle; if the error persists, contact Maytronics Customer Care or your dealer
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.