Maytronics Dolphin Pool cleaner Moving in circles
What this problem usually means
The robot drives in circles instead of covering the pool in its normal pattern.
Likely causes
- Clogged filter basket
- Debris stuck in the impeller housing or impeller cover
- Power supply incorrectly positioned
- Algae buildup, or pool water does not meet specifications
How to fix it — step by step
- Clean the filter basket
- Remove debris stuck in the impeller housing or impeller cover
- Place the power supply in a position that lets the robot freely reach the entire pool area
- Correct the pool and water conditions (chemistry and algae)
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.