Maytronics Dolphin Pool cleaner Doesn't climb the walls

What this problem usually means

The robot cleans the floor but will not climb the pool walls.

Likely causes

  1. Clogged filter basket
  2. Algae on the walls making them slippery
  3. Unsuitable pH level
  4. Debris stuck in the impeller housing or impeller cover
  5. Front/rear brushes are worn out, or are not the right model for smooth pool surfaces

How to fix it — step by step

  1. Clean the filter basket
  2. Check the level of chemicals in the water — improper levels allow algae growth that makes walls slippery; if so, adjust the levels and scrub the walls
  3. Remove debris stuck in the impeller housing or impeller cover
  4. Replace worn-out brushes, or fit a combined or wonder brush for smooth surfaces

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Maytronics Dolphin Pool cleaner problems

See all Maytronics Dolphin pool cleaner codes & guides →