Maytronics Dolphin Pool cleaner Connectivity LED flashing green
What this problem usually means
The power supply cannot connect to your Wi-Fi network and cloud — the connectivity LED keeps flashing green, which Maytronics defines as trying to connect, or a weak internet signal.
Likely causes
- The power supply is too far from the router (weak signal)
- The home router is not working properly
- The power supply connects to 2.4 GHz Wi-Fi only, and the router is 5 GHz or a combined-band setup
How to fix it — step by step
- Reset the power supply: disconnect the power cord and wait 1 minute
- Check that your smartphone has strong Wi-Fi connectivity near the power supply (for example, play an online video)
- Check that the home router is working properly
- Move the power supply as close as possible to the home router
- If you have a dual-band router, separate the 2.4 and 5 GHz networks and give them unique names, and connect to the 2.4 GHz network
- Consider installing a 2.4 GHz Wi-Fi extender; note you can still connect via Bluetooth while the LED keeps flashing green
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.