Levoit Air purifier Core 400S Poor air purification quality
What this problem usually means
Poor air purification quality, per the Core 400S troubleshooting table.
Likely causes
- Fan speed too low
- Objects blocking the sides or top of the purifier (inlet or outlet)
- Filter still in packaging or not properly in place
- Doors and windows open while the purifier is running
- Room larger than 358 ft2 / 33 m2, so purification takes longer
- Filter at end of life
How to fix it — step by step
- Tap the Fan Speed button to increase the fan speed
- Make sure no objects are blocking the sides or top of the air purifier (the inlet or outlet)
- Make sure the filter is removed from its packaging and properly in place
- Close doors and windows while using the air purifier
- Replace the filter if quality does not improve
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the 3-Stage Original Filter.
Parts that commonly fix it
- 3-Stage Original Filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Levoit Air purifier Core 400S problems
- VeSync app connection failure
- Air purifier makes an unusual noise while the fan is on
- Air purifier will not turn on or respond to button controls
- Air Quality Indicator always stays blue
- Air Quality Indicator always stays red
- Airflow is significantly reduced
- Check Filter Indicator
- Check Filter Indicator still on after replacing the filter
- E1