Levoit Air purifier Core 400S Air Quality Indicator always stays red

What this problem usually means

The Air Quality Indicator rings always stay red (Bad air quality), per the Core 400S troubleshooting table.

Likely causes

  1. AirSight Plus Laser Dust Sensor needs cleaning
  2. Ultrasonic humidifier mist near the purifier - the sensor detects the large mist particles and reads them as bad air

How to fix it — step by step

  1. Clean the AirSight Plus Laser Dust Sensor: unplug the purifier, place the end of a vacuum cleaner over the sensor openings, and run the vacuum for at least 10 seconds (clean the sensor every 3 months, more often in dusty environments)
  2. Avoid using an ultrasonic humidifier near the air purifier, or avoid using Auto Mode while one is running nearby

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Levoit Air purifier Core 400S problems

See all Levoit Core 400S codes & guides →