Levoit Air purifier Core 400S Check Filter Indicator still on after replacing the filter
What this problem usually means
The Check Filter Indicator is still on after the filter was replaced - the indicator must be reset manually after a filter change; it does not clear on its own.
Likely causes
- Check Filter Indicator was not reset after replacing the filter
How to fix it — step by step
- Turn on the air purifier
- Press and hold the Check Filter Indicator Reset button for 3 seconds
- Confirm the indicator turns off - that confirms a successful reset
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the 3-Stage Original Filter.
Parts that commonly fix it
- 3-Stage Original Filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Levoit Air purifier Core 400S problems
- E1
- Poor air purification quality
- VeSync app connection failure
- Air purifier makes an unusual noise while the fan is on
- Air purifier will not turn on or respond to button controls
- Air Quality Indicator always stays blue
- Air Quality Indicator always stays red
- Airflow is significantly reduced
- Check Filter Indicator