Levoit Air purifier Core 400S E1 Error Code
What the E1 code means
Display shows Error Code E1: the motor has malfunctioned.
Likely causes
- Motor malfunction
How to fix it — step by step
- Stop using the purifier and contact Levoit Customer Support - the manual gives no user repair for E1
- Do not try to repair the air purifier yourself
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the E1 code
No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Levoit Air purifier Core 400S error codes
- Poor air purification quality
- VeSync app connection failure
- Air purifier makes an unusual noise while the fan is on
- Air purifier will not turn on or respond to button controls
- Air Quality Indicator always stays blue
- Air Quality Indicator always stays red
- Airflow is significantly reduced
- Check Filter Indicator
- Check Filter Indicator still on after replacing the filter