Levoit Air purifier Core 400S Airflow is significantly reduced
What this problem usually means
Airflow from the purifier is significantly reduced, per the Core 400S troubleshooting table.
Likely causes
- Filter still in its plastic packaging or not properly in place
- Fan speed set too low
- Less than 15 inches / 38 cm of clearance on a side, blocking airflow
- Pre-filter clogged by large particles such as hair or lint
- Filter at end of life
How to fix it — step by step
- Make sure the filter is removed from its packaging and properly in place
- Tap the Fan Speed button to increase the fan speed
- Leave 15 inches / 38 cm of clearance on all sides of the air purifier
- Clean the pre-filter with a soft brush or vacuum hose
- Replace the filter if airflow does not recover
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the 3-Stage Original Filter.
Parts that commonly fix it
- 3-Stage Original Filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Levoit Air purifier Core 400S problems
- Check Filter Indicator
- Check Filter Indicator still on after replacing the filter
- E1
- Poor air purification quality
- VeSync app connection failure
- Air purifier makes an unusual noise while the fan is on
- Air purifier will not turn on or respond to button controls
- Air Quality Indicator always stays blue
- Air Quality Indicator always stays red