Levoit Air purifier Core 400S Air Quality Indicator always stays blue
What this problem usually means
The Air Quality Indicator always stays blue, even when the air quality is poor, per the Core 400S troubleshooting table.
Likely causes
- The pollution present is a gas - the AirSight Plus Laser Dust Sensor detects airborne particles but cannot detect gas
How to fix it — step by step
- Check whether gas is polluting the air - the sensor cannot detect gas, so a blue (Very Good) ring does not rule out gas pollution
- Remove the source of the gas pollution rather than relying on the particle indicator
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Levoit Air purifier Core 400S problems
- Air Quality Indicator always stays red
- Airflow is significantly reduced
- Check Filter Indicator
- Check Filter Indicator still on after replacing the filter
- E1
- Poor air purification quality
- VeSync app connection failure
- Air purifier makes an unusual noise while the fan is on
- Air purifier will not turn on or respond to button controls