Levoit Air purifier Core 400S Check Filter Indicator

What this problem usually means

The Check Filter Indicator lights up (red) as a reminder to check the filter. Depending on how often the purifier is used, it should turn on at about 12 months; a VeSync notification is also sent and the app shows remaining filter life, calculated from air quality, amount of use and other factors based on 12 hours of daily use.

Likely causes

  1. Filter has reached the check interval (about 12 months of use)
  2. Heavy use or poor air quality shortening calculated filter life

How to fix it — step by step

  1. Check the filter - replace it if you notice increased noise, decreased airflow, unusual odours or a visibly clogged filter
  2. Clean the outer pre-filter every 2-4 weeks with a soft brush or vacuum hose to remove hair, dust and large particles; do not clean the filter with water or other liquids
  3. If replacing: unplug, flip the purifier over or on its side, remove the filter cover, remove the old filter, vacuum out dust or hair inside with a vacuum hose, unwrap and fit the new filter, and replace the cover
  4. Turn the purifier on and press and hold the Check Filter Indicator Reset button for 3 seconds - the indicator turns off when successfully reset
  5. If the filter was changed before the indicator lit up, press and hold the reset button for 3 seconds - the indicator flashes for 3 seconds and then turns off

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Levoit Air purifier Core 400S problems

See all Levoit Core 400S codes & guides →