Levoit Air purifier Core 400S Air purifier will not turn on or respond to button controls
What this problem usually means
The purifier will not turn on or respond to button controls, per the Core 400S troubleshooting table.
Likely causes
- Purifier not plugged in
- Power cord damaged
- Purifier malfunctioning
How to fix it — step by step
- Plug in the air purifier
- Check whether the power cord is damaged - if it is, stop using the air purifier and contact Customer Support
- If it still will not turn on or respond, contact Customer Support - the purifier may be malfunctioning
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Levoit Air purifier Core 400S problems
- Air Quality Indicator always stays blue
- Air Quality Indicator always stays red
- Airflow is significantly reduced
- Check Filter Indicator
- Check Filter Indicator still on after replacing the filter
- E1
- Poor air purification quality
- VeSync app connection failure
- Air purifier makes an unusual noise while the fan is on