Hayward Pool cleaner AquaVac 250Li Debris escapes from the robot
What this problem usually means
Debris the robot has picked up escapes back out of the cleaner through the bottom suction mouth.
Likely causes
- The suction mouth's flap (which works like a door to keep debris in the compartment) is damaged
- Debris clogged at the suction mouth prevents the flap from closing
How to fix it — step by step
- Remove clogged debris from the suction mouth so the flap can close → Shop the suction mouth flap at Amazon
- If the flap is damaged, contact your dealer for replacement parts and instructions
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the suction mouth flap.
Parts that commonly fix it
- suction mouth flap - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Hayward manual is on Hayward's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Hayward Pool cleaner AquaVac 250Li problems
- Debris leaks at the filter cover
- Does not capture debris
- Does not cover the entire pool
- Float sinks
- Moves slowly or does not move at all
- Runtime shorter than advertised
- Stopped moving mid-pool but swivel head still turning
- Swivel head does not turn or turns slowly
- Swivel head rotates repeatedly
- Cannot be charged