Hayward Pool cleaner AquaVac 250Li Cannot be charged
What this problem usually means
The robot cannot be charged or recharged. Note the manual's warning: a damaged battery must be replaced by the dealer — do not replace the battery yourself, as that can cause severe injury and voids the warranty.
Likely causes
- Battery is damaged
- Charging base is not completely connected with the external adaptor and the robot
- External adaptor is out of order
How to fix it — step by step
- Make sure the charging base is connected with the external adaptor and the robot properly and completely → Shop the charging adaptor at Amazon
- If the external adaptor is faulty, contact your dealer for a replacement adaptor (using the wrong adaptor can damage the robot/battery and voids the warranty)
- If the battery is damaged, contact your dealer for battery replacement — do not replace the battery yourself
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the battery pack.
Shop the battery pack at Amazon
Also tied to this fault: charging adaptor - Shop at Amazon
Parts that commonly fix it
- battery pack - Shop at Amazon
- charging adaptor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Hayward manual is on Hayward's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.
Related Hayward Pool cleaner AquaVac 250Li problems
- Debris escapes from the robot
- Debris leaks at the filter cover
- Does not capture debris
- Does not cover the entire pool
- Float sinks
- Moves slowly or does not move at all
- Runtime shorter than advertised
- Stopped moving mid-pool but swivel head still turning
- Swivel head does not turn or turns slowly
- Swivel head rotates repeatedly