Hayward Pool cleaner Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 11 problems covered.
Shop Hayward Pool cleaner parts at Amazon
All Pool cleaner codes across brands →
Finding your model number: it is on the unit's rating plate.
AquaVac 250Li
All Hayward AquaVac 250Li codes & guides → (11 covered)
- Cannot be charged — The robot cannot be charged or recharged. Note the manual's warning: a damaged battery must be replaced by the dealer — do not replace the…
- Debris escapes from the robot — Debris the robot has picked up escapes back out of the cleaner through the bottom suction mouth.
- Debris leaks at the filter cover — Debris leaks out of the robot around the filter cover instead of staying in the debris compartment.
- Does not capture debris — The robot runs but does not capture debris — suction is weak or debris passes through.
- Does not cover the entire pool — The robot runs but does not cover the entire pool — areas are consistently missed.
- Float sinks — The robot's float sinks instead of floating as designed, affecting how the cleaner sits and moves in the water.
- Moves slowly or does not move at all — The robot moves slowly, or does not move at all.
- Runtime shorter than advertised — The robot's operating time is shorter than advertised — it stops well before the expected runtime.
- Stopped moving mid-pool but swivel head still turning — The robot stopped moving in the middle of the pool, but its swivel head is still turning — it is stuck rather than powered down.
- Swivel head does not turn or turns slowly — The swivel head does not turn, or turns noticeably slowly, so the robot cannot steer and clean normally.
- Swivel head rotates repeatedly — The swivel head rotates repeatedly after the robot sinks to the pool bottom. Per the manual this is usually trapped air leaving the robot…