Goodman Furnace Newer single-stage — alphanumeric display control (RS6621008) EE5 Error Code
What the EE5 code means
Open fuse or short in low-voltage wiring on newer Goodman single-stage furnaces with the alphanumeric display control.
Likely causes
- blown control board fuse → Shop the control board fuse at RepairClinic
- short in low-voltage or thermostat wiring
How to fix it — step by step
- Turn the thermostat to Off
- Check the furnace power switch and breaker are on
- Do not repeatedly replace the fuse — a repeat blow means a short
- Call a licensed HVAC technician to locate the short
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the control board fuse.
Shop the control board fuse at RepairClinic or Amazon
Also tied to this fault: control board - Shop at RepairClinic or Amazon
Parts that commonly fix the EE5 code
- control board fuse - Shop at RepairClinic or Amazon
- control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Goodman manual is on Goodman's support site — you'll need your model number.
Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.
Related Goodman Furnace Newer single-stage — alphanumeric display control (RS6621008) error codes
See all Goodman Newer single-stage — alphanumeric display control (RS6621008) codes & guides →