GE Dryer Profile DPVH890 Series E81 Error Code
What the E81 code means
On GE Profile DPVH890 dryers (technical service manual): Power Model fault - no model select connector was detected; check the model selector on the power board.
Likely causes
- Model select connector missing or loose on the power board
- Wrong or recently replaced power board without the model selector fitted
- Damaged board connector
How to fix it — step by step
- Unplug the dryer for 5 minutes and restore power once - especially if a board was recently replaced → Shop the power board at RepairClinic
- If E81 returns, arrange service; the model selector on the power board needs checking
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the power board.
Parts that commonly fix the E81 code
- power board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.