GE Dryer Profile DPVH890 Series E17 Error Code
What the E17 code means
On GE Profile DPVH890 dryers (technical service manual): VFD Communication Error - a problem with the serial communication interface between the UI and the VFD (variable frequency drive).
Likely causes
- Loose serial communication wiring
- Failed VFD / motor drive board → Shop the vfd drive board at RepairClinic
- Failed UI control board
How to fix it — step by step
- Unplug the dryer for 5 minutes, then restore power and try once
- If E17 returns, arrange service - drive communication is not a DIY repair
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the VFD drive board.
Shop the VFD drive board at RepairClinic or Amazon
Also tied to this fault: user interface board - Shop at RepairClinic or Amazon
Parts that commonly fix the E17 code
- VFD drive board - Shop at RepairClinic or Amazon
- user interface board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.