GE Dryer Profile DPVH890 Series E2 Error Code
What the E2 code means
On GE Profile DPVH890 dryers (technical service manual): Inlet Short - the inlet thermistor is shorted; check and replace if necessary.
Likely causes
- Shorted inlet thermistor → Shop the inlet thermistor at RepairClinic
- Pinched or damaged thermistor wiring
- Moisture/contamination at the thermistor connector
How to fix it — step by step
- Unplug the dryer and let it cool
- Clean the lint filter and check the vent - overheating can stress the sensor circuit
- Try one cycle; if E2 returns, the thermistor needs professional testing/replacement
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the inlet thermistor.
Parts that commonly fix the E2 code
- inlet thermistor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.