GE Dryer Profile DPVH890 Series E11 Error Code
What the E11 code means
On GE Profile DPVH890 dryers (technical service manual): Blocked Airflow - check the ventilation system.
Likely causes
- Lint-clogged vent duct or outside vent hood
- Crushed or overly long vent hose
- Clogged lint filter
- Blocked blower/exhaust path inside the dryer
How to fix it — step by step
- Clean the lint filter
- Disconnect and clean out the vent duct (or have it cleaned) and make sure the hose is not crushed
- Check the outside vent hood flaps open while the dryer runs
- Run a short cycle and confirm strong airflow outside
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the E11 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.