GE Dryer Profile DPVH890 Series E12 Error Code
What the E12 code means
On GE Profile DPVH890 dryers (technical service manual): Drum Motor fault - the motor is not rotating properly, or the centrifugal switch is bad.
Likely causes
- Failed drum motor → Shop the drum motor at RepairClinic
- Bad motor centrifugal switch
- Broken or slipped drive belt stopping rotation → Shop the drive belt at RepairClinic
- Drum obstruction or seized roller/idler
How to fix it — step by step
- Unplug the dryer
- Check the drum turns by hand and lighten an overloaded load
- Try one cycle and listen for the motor humming without tumbling
- If the drum still will not turn, arrange service
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the drum motor.
Shop the drum motor at RepairClinic or Amazon
Also tied to this fault: drive belt - Shop at RepairClinic or Amazon
Parts that commonly fix the E12 code
- drum motor - Shop at RepairClinic or Amazon
- drive belt - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.