Friedrich Window Air Conditioner Kühl series (R-410A) 6 Error Code
What the 6 code means
Friedrich Kühl (R-410A) series error code 6, maintenance icon flashing: outdoor coil temperature greater than 175°F. Per the manual, the unit shuts down for 5 minutes, resumes for 3 minutes, and continues to monitor; if the test fails 3 times the severity is increased and the unit is locked out.
Likely causes
- Dirty or blocked outdoor (condenser) coil restricting heat rejection
- Outdoor fan not moving enough air
- Refrigerant system fault causing excessive coil temperature
How to fix it — step by step
- Turn the unit off and clear any blockage from the outdoor side of the unit
- Clean the air filter and make sure airflow is unobstructed
- If the unit locks out after repeated failures, call a technician - repeated high coil temperature points to a fan or refrigerant-system fault
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the outdoor coil temperature sensor.
Shop the outdoor coil temperature sensor at RepairClinic or Amazon
Also tied to this fault: outdoor fan motor - Shop at RepairClinic or Amazon
Parts that commonly fix the 6 code
- outdoor coil temperature sensor - Shop at RepairClinic or Amazon
- outdoor fan motor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.