Friedrich Window Air Conditioner Kühl series (R-410A) 14 Error Code
What the 14 code means
Friedrich Kühl (R-410A) series error code 14, maintenance icon flashing: discharge air temperature sensor is open or shorted. Per the manual, the control board overrides the sensor, sets the temperature to 75°F, and continues to monitor.
Likely causes
- Discharge air temperature sensor open circuit or short circuit
- Loose sensor connection on the control board
How to fix it — step by step
- Note that the unit continues to operate with the sensor overridden at a 75°F setpoint
- Call a technician to test and replace the discharge air temperature sensor or repair its connection → Shop the discharge air temperature sensor at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the discharge air temperature sensor.
Shop the discharge air temperature sensor at RepairClinic or Amazon
Parts that commonly fix the 14 code
- discharge air temperature sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.