Friedrich Window Air Conditioner Kühl series (R-410A) 2 Error Code
What the 2 code means
Friedrich Kühl (R-410A) series error code 2, maintenance icon flashing: input voltage out of specification (103-127V / 187-253V). Per the manual, the control board opens all relays until voltage is back within specification, then resumes operation.
Likely causes
- Supply voltage too low or too high
- Circuit overloaded by other appliances
- Utility power fluctuation
How to fix it — step by step
- Turn the unit off until supply power is stable and within the unit's rated range
- Make sure the unit is on its own dedicated circuit as specified in the manual
- If voltage problems persist, have an electrician check the supply - do not keep resetting the unit
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the control board.
Parts that commonly fix the 2 code
- control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.