Friedrich Window Air Conditioner Kühl series (R-410A) 24 Error Code
What the 24 code means
Friedrich Kühl (R-410A) series error code 24, maintenance icon flashing: outdoor air temperature sensor is open or shorted. Per the manual, the unit continues with normal operation and continues to monitor the sensor.
Likely causes
- Outdoor air temperature sensor open circuit or short circuit
- Loose sensor connection on the control board
How to fix it — step by step
- Note that the unit continues normal operation while monitoring the sensor
- Call a technician to test and replace the outdoor air temperature sensor or repair its connection → Shop the outdoor air temperature sensor at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the outdoor air temperature sensor.
Shop the outdoor air temperature sensor at RepairClinic or Amazon
Parts that commonly fix the 24 code
- outdoor air temperature sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.