Friedrich Window Air Conditioner Kühl series (R-410A) 3 Error Code
What the 3 code means
Friedrich Kühl (R-410A) series error code 3, maintenance icon flashing: indoor temperature sensor is open or shorted. Per the manual, the control board sets the temperature to 75°F in cooling or 68°F in heating and the unit continues to operate.
Likely causes
- Indoor temperature sensor open circuit or short circuit
- Loose sensor connection on the control board
How to fix it — step by step
- Note that the unit will keep running at the manual's default setpoints (75°F cooling / 68°F heating) while the fault is active
- Call a technician to test and replace the indoor temperature sensor or repair its connection → Shop the indoor temperature sensor at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the indoor temperature sensor.
Shop the indoor temperature sensor at RepairClinic or Amazon
Parts that commonly fix the 3 code
- indoor temperature sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.