Friedrich Window Air Conditioner Kühl series (R-410A) 12 Error Code
What the 12 code means
Friedrich Kühl (R-410A) series error code 12, maintenance icon flashing: discharge air temperature greater than 185°F. Per the manual, the heat pump and electric heater shut down and the fan runs at high speed until temperature falls to 100°F, then operation resumes; the third occurrence in 1 hour locks the unit out.
Likely causes
- Restricted airflow causing discharge air to overheat in heating
- Electric heater or heat pump fault → Shop the electric heater at RepairClinic
- Dirty filter or blocked indoor airflow
How to fix it — step by step
- Turn the unit off, clean the air filter, and clear any airflow blockage
- Restart once the unit has cooled
- If the unit locks out after a third occurrence in an hour, call a technician
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the discharge air temperature sensor.
Shop the discharge air temperature sensor at RepairClinic or Amazon
Also tied to this fault: electric heater - Shop at RepairClinic or Amazon
Parts that commonly fix the 12 code
- discharge air temperature sensor - Shop at RepairClinic or Amazon
- electric heater - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.